Back to Top
ProOne Dual Stage ProMax Countertop Tap Water Filter System
ProOne® Countertop Water Filtration System with ProMax™ "all-in-one" filter technology. Helps reduce/remove a broad range of over 200 contaminants.
Dual stage filtration. Stage 1 includes a 5-Micron pleated pre-sediment filter which helps protect your new ProOne® filtration system from sediments commonly found in aging water supply pipes.
Propur Dual Stage Countertop Water Filtration System
Designed to fit most standard taps with a removable aerator.Enjoy purified water by just turning on your tap and diverter valve.
New Propur® PMC-3002 Dual Stage Countertop Water Filtration System
Stage 1 includes a 5-Micron pleated pre-sediment filter which helps protect your new Propur® filtration system from sediments commonly found in aging water supply pipes. Reduces damaging effects of sediment such as dirt, sand, debris and rust. Ideal for use with most city or well water.
Stage 2 includes ProMax™ “all-in-one” filter technology. Helps reduce/remove a broad range of over 200 contaminants including VOC’s, lead, fluoride, heavy metals, pesticides, SVC’s, disinfectants, inorganic non-metallics, herbicides, pharmaceuticals, PFOA, PFOS and microplastics. Tested to NSF/ANSI-42 & 53 standards. See ProMax™ Lab Report for details.
Propur® Countertop System with ProMax™ Specifications
Type of installation: Countertop
Maximum Working Pressure: 860 Kpa (125 psig)
Minimum Working Pressure: 62 Kpa (10 psig)
Maximum Working Temperature: 38° C
Minimum Working Temperature: 5° C
Recommended Flow Rate: 0.2 – 1.0 gpm
Contaminant Reduction: Refer to Lab Report
Filter Life Expectancy: Up to 1 year
Replacement filter: PMC34RF
Replacement 5-Micron filter: PSD-1005
Click Here for PMC-3000 Instuctions
Click Here for ProMax™ Lab Report
| FAQs | Q: How does the filter system attach to my tap? A: The filter unit comes with a small tap adaptor that screws into any tap with a standard internal thread aerator (circular mesh fitting screwed inside the end of your tap). Most modern taps use this type of aerator. The filter system can then easily clipped-on and clipped-off the new attachment that has replaced your aerator. It is now ready to use. Q: How do I operate the filter system? A: The filter system is designed so that you can use your tap as normal, and you can engage the filter when you want to use it. There is a small lever on the side of the tap attachment that can be switched on to engage the filter, or switched off when you don't need to filter the water, such as when washing dishes. When the filter is engaged the water passes up through one tube into the filter unit and back through a second tube and out of your tap as it normally would. If the unit is not engaged the water simply passes straight through your tap as it normally would. Important: Always disengage your filter when using hot water. Q: How large is the filter unit? A: The chrome bench-top unit is approximately the same size as a 1 litre bottle of milk. Q: If I haven't used my filter unit for a while do I need to clean it? A: The unit is designed to be portable so you can take it to a holiday home, but if you leave it for a while without using it you should run the filter system for 2-5 minutes before using it again. The filter system does not require cleaning, but the life of the filter will be shorter if you do not follow manufacturer's recommendations. If the unit is not going to be used for a while, flush it through with chlorinated water, then dry it out for use at a later date. |
|---|
Write Your Own Review
Delivery Timeframes:
Our company is located in Auckland, New Zealand. All online orders are sent from our warehouse in Auckland, New Zealand and are sent out Monday, Wednesday and Friday. Orders over $150.00 are sent free of charge.
We have 2 shipping options for orders under $150:
- Australia Wide Omni Parcel (PO Boxes & Rural Only) - $11.95
- Australia Wide Toll Tracked (No PO Boxes / No Rural) - $11.95
Orders over $150 with free shipping will be sent Toll Tracked, unless you have a PO Box / Rural address, in which case it will be sent with Omni Parcel.
All deliveries will be sent tracked to your door.
Omni Parcel orders will be left without a signature.
Estimated delivery windows are as follows (may vary due to staff shortages or customs delays)
- SYD/MEL/BRIS 3 - 5 business days
- NSW/VICT/ACT/QLD 3 - 6 business days
- Adelaide/Perth Metro 3 - 6 business days
- SA/WA 5 - 10 business days
- TAS/NT 5 - 10 business days
**Please expect some delays due to backlogs, staff shortages and courier delays. The Delivery timeframes above are the usual timeframes, however the majority of orders are taking a lot longer than this at present. We appreciate your patience and understanding, and we will get your order to you as soon as we can. Please note that if an item is on Back Order, all items in that order will be held until all items have arrived. We only send out one parcel. Due to the delays we cannot change any orders once the order has been placed. Thank you, Fill2Pure Team.
